Disposing Of The Appliance - OBH Nordica PRIME MIX Instruction Manual

cleaning the motor unit. Dry thoroughly before using the appliance again or
putting it away.
IMPORTANT!
THE MOTOR SECTION MUST NEVER BE IMMERSED IN ANY LIQUID!
The conformity according to EN60335 clause 11 was verified by using the
following recipe: 0.75kg silicone oil + 0.9kg flour blending for 90s

Disposing of the appliance

By law, electrical and electronic equipment must be collected for the
recycling of components. Electrical and electronic equipment marked
with the waste management symbol must be disposed of at a municipal
recycling point.
OBH Nordica LIMITED GUARANTEE
The Guarantee
OBH Nordica guarantees this product against any manufacturing defect in
materials or workmanship during 2 years within Sweden, Norway, Denmark and
Finland, starting from the initial date of purchase or delivery date.
This manufacturer's commercial guarantee covers all costs related to restoring
the proven defective product so that it conforms to its original specifications,
through the repair or replacement of any defective part and the necessary
labour. At OBH Nordicas choice, a replacement product may be provided
instead of repairing a defective product. OBH Nordicas sole obligation and
your exclusive resolution under this guarantee are limited to such repair or
replacement.
Conditions & Exclusions
OBH Nordica shall not be obliged to repair or replace any product which is
not accompanied by a valid proof of purchase. The defective product may be
returned to the store of purchase.
This guarantee applies only for products purchased and used for domestic
purposes and will not cover any damage which occurs as a result of misuse,
negligence, failure to follow OBH Nordica instructions, or a modification
or unauthorised repair of the product, faulty packaging by the owner or
mishandling by any carrier. It also does not cover normal wear and tear,
maintenance or replacement of consumable parts, or the following:
- using the wrong type of water or consumable
- mechanical damages, overloading
- damages or poor results specifically due to wrong voltage or frequency as
stamped on the product ID or specification
- ingress of water, dust or insects into the product