What To Do If Your Appliance Does Not Work - OBH Nordica Blend Force LH4358S0 Instructions Of Use

Note: Incorrectly fitting the seal can result in ingredients leaking
from the blender jug, spice mill or herb chopper.
CLEANING THE JUG (PLASTIC, GLASS OR STEEL VERSION
DEPENDING ON MODEL) IN A DISHWASHER:
The plastic, glass or steel jug (C4), the lid (C5), the cap (C6), the spice
•
mill bowl (E2), the herb chopper bowl (D3), as well as the spatula (F)
can be cleaned in the upper basket of a dishwasher using the "ECO" or
"REDUCED SALT" programme. The blades of the blender jug (C2), the
seals (C3 & D2), spice mill (E1) and the herb chopper (D1) must not
be cleaned in a dishwasher.

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?

Problems
The appliance does not
work.
Excessive vibrations.
There are leaks at the lid.
There are leaks at the
base of the blender jug
There are leaks at the
base of the accessories
(spice mill or herb mill).
The blades have difficulty
turning.
Causes
The appliance is not properly
plugged into the electrical outlet.
The jug or the accessory is not
correctly positioned or locked on
the motor unit.
The appliance is not placed on
a flat, stable and heat-resistant
surface.
The volume of ingredients is too
big.
The volume of ingredients is too
big.
The lid is not correctly positioned.
The seal of the blender jug (C3)
is not correctly positioned or is
missing.
The seal (D2) is not correctly
positioned or is missing.
Making a liquid preparation in the
accessory.
The pieces of food are too large
or too hard.
Solutions
Plug the appliance into an
electrical outlet and turn
it on.
Check that the jug or
the accessory is properly
positioned and locked in the
motor unit as shown on the
images of the Instructions
for Use.
Place the appliance on a
flat surface.
Reduce the quantity of
ingredients in the appliance.
Reduce the quantity of
ingredients in the appliance.
Lock the lid correctly on the
blender jug.
Reposition the seal and lock
the blade correctly (C2).
Reposition the seal on the
blade support (D1, E1) and
lock the assembly correctly
on the bowl (D3, E2).
Do not use liquid in the
accessory because this
usage is not possible.
Reduce the quantity
or size of ingredients.
Add liquid (for blender only).
47