Safety Locking; Using For The First Time - OBH Nordica Blend Force LH4358S0 Instructions Of Use

DESCRIPTION
A. Motor unit
B. Speed control dial
C. Blender:
C1. Blade support
C2. Blade
(*depending on model)
C3. Seal
C4. Jug
C5. Lid
C6. Measuring cap
D. Spice mill
(* accessory depending on model)
C1. Blade support
D2. Spice mill blade
D3. Seal
D4. Spice mill bowl
E. Herb chopper
(* accessory depending on model)
C1. Blade support
D2. Seal
E1. Herb chopper blade
E2. Herb chopper bowl
F. Spatula
(* accessory depending on model)
The accessories supplied with the model that you have purchased are shown
on the label on the top of the packaging.
WARNING: Read the instructions for use carefully before using your appliance
for the first time: the manufacturer shall accept no liability in the event of any
use that does not comply with the instructions. Keep them in a safe place so
that you can refer to them later.

SAFETY LOCKING

• The appliance can only operate when the jug (C) or the accessories (D or
E) are correctly positioned and locked on the motor unit (A).

USING FOR THE FIRST TIME

• Before you use your appliance for the first time, clean all the accessories
(C, D, E, F) using hot soapy water, except for the motor unit (A).
WARNING: The blades are extremely sharp so handle them carefully when
•
using and cleaning the appliance.
• Verify that the packaging has been removed before using the appliance.
Important note: Turn the speed selector (B) to "0" before placing the
•
blender jug or the accessories on the motor unit.
• The appliance will only start if the jug or the accessory is correctly
positioned and locked on the motor unit.
44