Advertisement
Available languages
Available languages
After cleaning, remember to correctly fit the seal (F3) back onto the blade
•
unit (F1) (Fig. 11). Please be careful to avoid any damage to the seal by
touching the blades.
Note: Incorrectly fitting the seal can result in ingredients leaking from the
•
base of the blender jug.
•
Finish cleaning the jug with a damp cloth or sponge.
•
Rinse the inside of the jug and the lid under running water.
•
Take care when cleaning the blades in the blender jug and when you empty
the jug as they are sharp.
Use a damp cloth to clean the motor unit (A). Dry it carefully.
•
•
The detachable parts (lid, blade unit, locking ring,) can be cleaned with a
sponge and hot soapy water.
The jug (F4), blade unit (F1) (but not the seal (F3)), locking ring (F2) can
•
be cleaned in the dishwasher on the upper rack - use the 'ECO' or 'LOW
SALT' program.
Caution: The jug (F4), blade unit (F1) and locking ring (F2) must be
•
disassembled and placed separately in the dishwasher. Please do not put
the seal (F3) in the dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
Appliance does not work
The appliance stopped
while in use
Excessive vibrations
Leak from the lid
52
10
The plug is not connected
The blender jug is not positioned
correctly on the motor unit
The product is not placed on a
flat, stable surface
Volume of ingredients is too high
Volume of ingredients is too high
The lid is not correctly positioned
11
CAUSES
Overload
SOLUTIONS
Connect the appliance to a
socket with the same voltage as
that on the rating plate of the
appliance.
Check that the blender jug
is positioned properly on the
motor unit as explained in the
instructions.
Follow the instructions in section
USING YOUR BLENDER.
The cooling time is variable and
can last up to 30 minutes
Place the appliance on
a flat surface.
Reduce the quantity of
ingredients processed.
Reduce the quantity of
ingredients processed.
Place the lid correctly on the
blender jug.
Advertisement
