Alpha ESS Storion-SMILE-T10 Installation Manual page 13

INSTALLATION
Figure 28 Connection of the Communication Cables on the Inverter
Side-Removing Waterproff Baffle
Step 14
Please remove the cover of the cable box. Connect the AC cables to the corresponding
ports. Fix the cover back to the cable box, as Figure 33 shows.
Figure 34 Earthing Points
Step 15
Figure 34 shows the earthing points on the HV50056 and cable box. Please connect them
to the grounding copper bar of the customer.
21 22
Step 16
Cable Box Earthing Point
nearest battery from the HV50056 to the farthest battery in sequence of 1 to N. N is the number of
the batteries, which is min. 4 and max. 8.
Control Box Earthing Point
Step 17
breaker.
FFigure 31 Connection of the Communication Cables on the Inverter Side
DIP switch defines the ID address of each battery in one cluster. Set the DIP switch of the
Note: There should be no same ID number in one cluster.
Figure 36 Turning on the Switch
After wiring, please open the front cover of HV50056 and turn on the molded case circuit
INSTALLATION