Introduction; Support; Product Description - Husqvarna Automower 105 Operator's Manual

Serial number:
PIN code:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.husqvarna.com.

1.1 Support

For support about the product, speak to your
®
Husqvarna servicing dealer.

1.2 Product description

®
Note: Husqvarna regularly updates the
appearance and function of the products. Refer
Support on page 3 .
to
The product is a robotic lawn mower. The product
has a battery power source and cuts the grass
automatically. It continuously alternates between
mowing and charging. The movement pattern is
random, which means that the lawn is mowed
evenly and with less wear. The boundary wire
and the guide wire controls the movement of the
product within the work area. Sensors in the
product senses when it is approaching the
boundary wire. The front of the product always
passes the boundary wire by a specific distance
before the product turns around. When the
product hits an obstacle or approaches the
boundary wire the product selects a new
direction.
1285 - 004 - 16.04.2020

1 Introduction

The operator selects the operation settings with
the keys on the keypad. The display shows the
selected and possible operation settings, and the
operation mode of the product.
1.2.1 Mowing technique
The product is emission free, easy to use and
saves energy. The frequent cutting technique
improves the grass quality and decreases the
use of fertilizers. Collection of grass is not
necessary.
1.2.2 Find the charging station
The product operates until the battery state of
charge is low. Then it follows the guide wire to
the charging station. The guide wire is laid from
the charging station towards, for instance, a
remote part of the work area or through a narrow
passage. The guide wire is connected with the
boundary wire and makes it much easier and
faster for the product to find the charging station.
Introduction - 3