B-2.1 Overview: Disassembling The Ebike Basic/Comfort - GE eBike Service Manual

B-2.1 Overview: Disassembling the eBike basic/comfort
We recommend using the following tools to disassemble the device:
Flat bladed screwdrivers:
1 pc. 1.0 x 0.18 1 pc.
1 pc. 4.0 x 0.8
1 pc. 6.0 x 1.2
Fork wrenches:
1 pc. 5.5 mm
2 pc. 7 mm
1 pc. 13 mm
1 pc. 17 mm
1 pc. 19 mm
Socket wrenches :
1 pc. 5.5 mm
1 pc. 13 mm
Special tools
1 pc. crank extractor
2 pc. round pin, max. 3 mm, minimum length 15 mm
NOTE: Use the same tools to disassemble eBike L and eBike EL. Two wide metal angles may be required to
remove the ergometer casing (side length approx. 1.5 cm x 15 cm).
- 14 -
B: Mechanical Design
Philips screwdrivers:
PH 1
1 pc. PH 2
1 pc. PH 3
Allan keys:
1 pc. 2.5 mm
1 pc. 3 mm
1 pc. 4 mm
1 pc. 5 mm
1 pc. 6 mm
Pliers
1 pc. side cutter
1 pc. flat nose pliers
1 pc. multigrip pliers
eBike, eBike L, eBike EL
straight
straight and elbow
straight and elbow
straight
straight and elbow
2018112-003 Rev J