Removing A Chassis From The Equipment Rack - Cisco ASR 9000 Series Installation Manual

Aggregation services router hardware
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Replacing Cisco ASR 9000 Series Router Components
Procedure
Step 1
Remove the SFC card from slot FC0. Follow the procedure explained in the topic
Cards from the Chassis, on page
Alarms are raised when fabric cards are removed and when the system has a combination of old and new
generation fabric cards. These alarms clear when all the fabric cards are replaced.
Step 2
Insert A99-SFC3-T/A99-SFC3-S card in slot FC0. Follow the procedure explained in the topic
Cards in the Chassis, on page 247
Step 3
Wait for A99-SFC3-T/A99-SFC3-S card to come online. Verify the card state is OPERATIONAL using the
show platform command.
Step 4
Repeat Step1 through Step 3 for migrating remaining FCs from slot FC1 to slot FC4.
Example:
Router# show platform
Node
--------------------------------------------------------------------------------
0/RSP0/CPU0
0/RSP1/CPU0
0/FT0
0/FT1
0/1/CPU0
0/FC0
0/FC1
0/FC2
0/FC3
0/FC4
0/PT0
0/PT1
Use the admin show alarm and show pfm location all commands to verify no additonal alarms are raised
after replacing all the FCs.

Removing a Chassis from the Equipment Rack

Follow these steps to remove the chassis and its components from the equipment rack:
Procedure
Step 1
Power off the router (see
Caution
Step 2
Power off the circuit breakers to the power supplies.
Step 3
Disconnect the power from the power modules on the rear of the chassis.
245.
Type
A9K-RSP5-TR(Standby)
A9K-RSP5-TR(Active)
ASR-9910-FAN
ASR-9910-FAN
A9K-8X100GE-TR
A99-SFC3-S
A99-SFC3-S
A99-SFC3-S
A99-SFC3-S
A99-SFC3-S
A9K-AC-PEM-V3
A9K-AC-PEM-V3
Powering Off the Router, on page
You must use two people to remove the chassis from the equipment rack safely. An empty chassis
can weigh up to approximately 300 pounds (136 kg).
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Removing a Chassis from the Equipment Rack
State
Config state
IOS XR RUN
NSHUT
IOS XR RUN
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
IOS XR RUN
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
OPERATIONAL
NSHUT
223).
Removing and Replacing
Replacing
263

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents