Supplemental Bonding And Grounding Connections - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis
Figure 128: Installing the Cisco ASR 9922 Router Chassis in a 4-Post Rack

Supplemental Bonding and Grounding Connections

Before you connect power to the router, or power on the router for the first time, we recommend that you
connect the central office ground system or Network Equipment Building System (NEBS) to the threaded
supplemental bonding and grounding receptacles on the router. For more information on supplemental bonding
and grounding cable requirements, see
The table below references the grounding receptacle locations for the Cisco ASR 9000 Series Routers.
Table 12: Grounding Receptacle Locations
Model Number
Cisco ASR 9010 Router
and Cisco ASR 9910
Router
NEBS Supplemental Unit Bonding and Grounding
Grounding Receptacle Location
Bottom rear right side of the chassis
for the Cisco ASR 9010 Router, on page
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Supplemental Bonding and Grounding Connections
(Figure 129: NEBS Bonding and Grounding
122).
Guidelines.
121