Migrating From Rsp4/Rsp4-S/Rsp-L To Rsp5 Card - Cisco ASR 9000 Series Installation Manual

Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card

Node 0/RSP0/CPU0 is in ACTIVE role
Node Redundancy Partner (0/RSP1/CPU0) is in STANDBY role
Standby node in 0/RSP1/CPU0 is ready
Standby node in 0/RSP1/CPU0 is NSR-not-configured
Node 0/RSP0/CPU0 is in process group PRIMARY role
Process Redundancy Partner (0/RSP1/CPU0) is in BACKUP role
Backup node in 0/RSP1/CPU0 is ready
Backup node in 0/RSP1/CPU0 is NSR-ready
Group
---------
dsc
dlrsc
central-services 0/RSP0/CPU0
v4-routing
netmgmt
mcast-routing
v6-routing
Router# show platform
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/RSP1/CPU0
0/0/CPU0
0/2/CPU0
0/3/CPU0
Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card
Before you begin:
• You must have console access to the router. Default console speed on RSP5 is set as 115200.
• The router must be running Cisco 64-bit IOS XR software release 6.5.15 or later version. If your router
• The router must have two RSP4/S/L cards (active and standby) up and running. In this section, RSP
• First and second generation Cisco ASR 9000 Ethernet Line Cards must be removed from the chassis as
Procedure
Step 1 Use the show redundancy summary command to verify that the RSP0 and RSP1 are in Ready State.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
258
Primary
---------
0/RSP0/CPU0
0/RSP0/CPU0
0/RSP0/CPU0
0/RSP0/CPU0
0/RSP0/CPU0
0/RSP0/CPU0
Type
A9K-RSP880-LT-TR(Active)
A9K-RSP880-LT-TR(Standby) IOS XR RUN
A99-8X100GE-TR
A99-12X100GE
A99-8X100GE-TR
is running a 32-bit IOS XR release, you will need to migrate to 64-bit XR release 6.5.15 or later. Refer
to Migration Guide for Cisco ASR 9000 Series
Note
RSP5 is only supported with 64-bit IOS XR software releases.
refers to RSP4/RSP4-S/RSP4-L in the system.
they are incompatible with RSP5.
Replacing Cisco ASR 9000 Series Router Components
Backup Status
--------- ---------
0/RSP1/CPU0 Ready
0/RSP1/CPU0 Ready
0/RSP1/CPU0 Ready
0/RSP1/CPU0 Ready
0/RSP1/CPU0 Ready
0/RSP1/CPU0 Ready
0/RSP1/CPU0 Ready
State
IOS XR RUN
IOS XR RUN
IOS XR RUN
IOS XR RUN
Routers.
Config State
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON