Unpacking The Cisco Asr 9010 Router - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis
Step 4
Remove components, such as line cards, power supplies, and the fan tray, to reduce the weight before lifting
or moving the chassis. See
information.
Step 5
Save the packaging materials in case the router needs repackaging or shipping.

Unpacking the Cisco ASR 9010 Router

Follow these steps to unpack the Cisco ASR 9010 Router from its shipping container.
Procedure
Step 1
Cut the straps that secure the cardboard shipping container to the pallet.
Step 2 Remove the cardboard shipping container.
Step 3
Remove the packaging material.
a) Remove the foam packaging material from the top of the router.
b) Remove all screws that secure the four hold-down brackets to the router chassis. The forward hold-down
brackets are secured to the router mounting brackets by two screws. The rear hold-down brackets are
secured to the chassis by four screws. Save these four screws used to hold the rear bracket to the chassis
to use later to attach the ground strap.
Step 4 Remove two bolts per hold-down bracket that secure the brackets to the pallet.
Removing Components Before Installing the Chassis, on page 74
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Unpacking the Cisco ASR 9010 Router
for more
59