Asr 9912 Router - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis
a Loosen the captive
screws.
Figure 99: Removing a Line Card from the Cisco ASR 9910 Router Chassis
Step 3 Repeat for each RSP or line card.
Removing RP Cards, Fabric Cards, and Line Cards from the Cisco ASR 9922 Router and Cisco ASR
9912 Router
This section describes how to remove the Route Processor (RP) cards, Fabric Card (FC), and Line Cards
(LCs) from the Cisco ASR 9922 Router and Cisco ASR 9912 Router. The table below describes the components
and slot numbering for each router.
Removing RP Cards, Fabric Cards, and Line Cards from the Cisco ASR 9922 Router and Cisco ASR 9912 Router
b Pivot the ejector
levers to unseat the
card from the
backplane connector.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
c Slide the card out of
the chassis.
91