Removing A Fan Tray From The Cisco Asr 9906 Router - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis
Step 4 Slide out the fan tray completely from the chassis while supporting it with your other hand.
Caution
Figure 83: Removing or Installing the Fan Tray on the Cisco ASR 9904 Router Chassis

Removing a Fan Tray from the Cisco ASR 9906 Router

Follow these steps to remove a fan tray from the Cisco ASR 9906 Router (see the figure below).
Procedure
Step 1
Loosen the screws that secure the fan tray door to the chassis and open the door.
Step 2 Loosen the captive installation screw on the front of the fan tray.
Step 3
Using the handle on the front panel, pull the fan tray halfway out of the chassis.
Step 4 Wait for all the fans to stop rotating.
Step 5
Slide out the fan tray completely from the chassis while supporting it with your other hand.
Caution
Use two hands when handling the fan tray. The fan tray weighs about 11.0 pounds (4.99 kg).
Use two hands when handling the fan tray. The fan tray weighs about 8.0 pounds (3.63 kg).
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Removing a Fan Tray from the Cisco ASR 9906 Router
79