Furuno ENVISION AR-100M Operator's Manual page 61

Note: If the virus definition file is not saved in the
USB flash memory, the message shown in the
figure to the right appears. Confirm that the virus
definition file is saved correctly in the flash mem-
ory.
6. Click the [Update] button.
The confirmation message as shown in the fig-
ure to the right appears.
7. Click the [OK] button.
The progress bar is shown while copying the definition file. After completing the
file copy, the confirmation message shown below-right appears.
Note: Do not remove the USB flash memory during the
copying. If the flash memory is removed, the message
shown in the figure to the right appears. Close the mes-
sage and retry updating the virus definition after inserting
the USB flash memory.
8. Disconnect the USB flash memory, then click the
[OK] button to reboot the system.
The system is restarted automatically to update
the virus definition. The message shown in the fig-
ure to the right appears while updating the defini-
tion. After the updating is completed, the system is
restarted automatically, then the normal startup screen appears.
Note: If the updating fails, the message shown in the fig-
ure to the right appears. Close the message and retry up-
dating the virus definition.
3. MAINTENANCE
E0202
3-13