Furuno ENVISION AR-100M Operator's Manual page 38

2. INSTALLATION AND INITIAL SETTINGS
*: The USB keyboard is used only for adjusting the initial settings menu. To prevent
unintended operation, do not connect the USB keyboard during normal use of the
system.
Note: An ENC dongle is necessary to share the ENC charts from the ECDIS. The
ENC dongle is supplied with the AR navigation system. Keep the ENC dongle con-
nected to one of the USB ports on the main PC while using the AR navigation system.
Hiding the LED indicators
If the LED indicators on the main PC and the ENC dongle are too bright at night, cover
them with vinyl tape. The location of the LED indicator is shown in the following figure.
Remote PWR switch
Connect a remote switch (supplied locally) to the Remote PWR switch port, to turn the
system on/off from a remote switch.
2-8
Front
1
2
Rear
Status
Short 1 and 2. Turn the system on/off.
Open
ENC dongle
Description
-