How To Setup The Ccrp; How To Setup The Bow Position - Furuno ENVISION AR-100M Operator's Manual

2.3.3

How to setup the CCRP

Do as follows to setup the CCRP (Consistent Common Reference Position). The AR
navigation system uses CCRP as reference points for CPA/TCPA calculations.
1. Login as a service technician, referring to subsection 2.3.1.
2. Click [Service Setting].
3. Click [CCRP].
4. Adjust the slider bar for [Position] to set the CCRP calculated from the location of
the EPFS device to use as a reference.
• [X]: Set the port-starboard (lateral) location of the CCRP, which is calculated
from the location of the EPFS device.
• [Y]: Set the bow-stern (longitudinal) location of the CCRP, which is calculated
from the location of the EPFS device.
5. Close the main menu.
2.3.4

How to setup the bow position

Do as follows to setup the bow position. The AR navigation system uses bow position
as reference points for BCR/BCT calculations.
1. Login as a service technician, referring to subsection 2.3.1.
2. Click [Service Setting].
3. Click [Bow].
2. INSTALLATION AND INITIAL SETTINGS
+
X
EPFS
Y
device
-
(0, 0)
-
+
X
Y
EPFS
device
-
(0, 0)
-
CCRP
+
Bow
+
2-13