Table of Contents
Advertisement
3. MAINTENANCE
3.8
How to Perform the Virus Scan
You can perform the virus scan using the equipped anti-virus software.The virus defi-
nitions and related files must be kept up-to-date. For how to update the virus defini-
tions, see section 3.10.
Note: The virus scan may take more than 30 minutes, and the scan cannot be abort-
ed. Also, the system reboot is needed after completing the scan.
1. Click the menu button to open the main
menu.
2. Click [Virus Scan].
3. Click the [Scan] button.
The message shown in the figure to the right ap-
pears.
4. Click the [OK] button to start the virus scan.
The message shown below-left appears during the
virus scan. After completing the scan, the result win-
dow shown below-right appears.
5. Click the [OK] button to close the result window.
The message shown in the figure to the right appears.
6. Click the [OK] button to restart the system.
The system is restarted and the normal startup screen ap-
pears.
Note: If the anti-virus software cannot remove a detected threat(s) (virus(es)), do as
follows:
1) Press the power button to turn the power off.
2) Disconnect the power and LAN cables from the main PC.
3) Contact your dealer to request service.
3-10
Advertisement
Table of Contents
