Table of Contents
Advertisement
1. OPERATION
1.11
How to Adjust the Video Image Position
When an AR object is not aligned with the target (AIS target, buoy, etc.) on the screen,
adjust the video image position to overlay correctly the object on the target.
Note: Do not move the IP camera after installation. When you want to adjust the video
image position, do as follows.
1. Click the menu button to open the main menu.
2. Click [Video].
3. Check the checkbox for [Visible Matching Controller] to
show the visible matching controller.
4. Show the horizon line and target shape, referring to
subsection 1.8.3 and subsection 1.8.8.
5. Click the buttons on the visible matching controller to
adjust video image position, considering the following
points.
• The horizon line must be aligned with the horizon on the screen.
• The target shape must be aligned with the actual AIS target. It is recommended
to select an AIS target that is stationary.
• The selective marker for the TT target must be aligned with the actual TT target.
Note: When the IP camera position is offset from the ship's center, the heading
guide is not aligned with the ship's bow on the video image, due to the offset ap-
plied.
Adjusting example
1 Before adjusting
1-18
Visible matching controller
Advertisement
Table of Contents
