Table of Contents
Advertisement
2. INSTALLATION AND INITIAL SETTINGS
2.2.3
IP camera
The IP camera is powered from the PoE adapter through the Ethernet interface using
PoE (Power over Ethernet). Connect the IP camera to the PoE adapter, using the sup-
plied LAN cable.
Note: Be sure to connect the LAN cable vertically.
After the connection, secure the LAN cable to the
bracket, using a cable tie (supplied locally).
Interface
No.
1
Status Indicator
2
Power Indicator
3
LAN/PoE
4
DC IN (12 V)
Hiding the LED indicators
If the LED indicators are too bright at night, cover them
with vinyl tape. The location of the LED indicator is
shown in the figure to the right.
2-10
1
2
Name
The LED (green) lights when the IP camera works correctly. In
the default setting, the status indicator LED stays off regardless
of the IP camera working status.
The LED (green) lights when the power is supplied to the IP
camera.
Connect with the PoE adapter, using the supplied LAN cable.
Not used.
4
3
Description
Connect the LAN
cable vertically.
Secure the cable
using a cable tie
(supplied locally).
Advertisement
Table of Contents
