Table of Contents
Advertisement
Error
Error message
code
E0427*
No Sensor Data. (CTW/STW1)
E0428*
No Sensor Data. (CTW/STW2)
E0429*
No Sensor Data. (CTW/STW3)
E042A*
No Sensor Data. (CTW/STW4)
E042B*
No Sensor Data. (CTW/STW5)
E042C*
No Sensor Data. (CTW/STW6)
E042D*
No Sensor Data. (CTW/STW7)
E042E*
No Sensor Data. (CTW/STW8)
E042F*
No Sensor Data. (CTW/STW9)
E0431
No Sensor Data. (TO WPT)
E0432
No Sensor Data. (AIS)
E0433
No Sensor Data. (L/L)
E0434
No Sensor Data. (HDG)
E0435
No Sensor Data. (PITCH/ROLL) Pitch/roll data without the specified format
E0436
No Sensor Data. (COG/SOG)
E0437*
No Sensor Data. (CTW/STW1)
E0438*
No Sensor Data. (CTW/STW2)
E0439*
No Sensor Data. (CTW/STW3)
E043A*
No Sensor Data. (CTW/STW4)
E043B*
No Sensor Data. (CTW/STW5)
E043C*
No Sensor Data. (CTW/STW6)
E043D*
No Sensor Data. (CTW/STW7)
E043E*
No Sensor Data. (CTW/STW8)
E043F*
No Sensor Data. (CTW/STW9)
E0441
No Sensor Data. (TO WPT)
E0443
No Sensor Data. (L/L)
E0444
No Sensor Data. (HDG)
Meaning/Remedy
No CTW/STW data received. The number
in the brackets indicates radar number.
Confirm the connection between the
LAN1 port of the main PC and network
hub that relays sensor data, and the
equipment that outputs CTW/STW data is
turned on and works correctly. When the
error is not rectified even if the network
status is normal, restart the system.
Waypoint ID data without the specified
format data received. Confirm that the
equipment that outputs waypoint ID data
is turned on and works correctly.
AIS data without the specified format data
received. Confirm that the equipment that
outputs AIS data is turned on and works
correctly.
Position data without the specified format
data received. Confirm that the equip-
ments that outputs position data is turned
on and works correctly.
Heading data without the specified format
data received. Confirm that the equip-
ment that outputs heading data is turned
on and works correctly.
data received. Confirm that the equip-
ment that outputs pitch/roll data is turned
on and works correctly.
COG/SOG data without the specified for-
mat data received. Confirm that the
equipment that outputs COG/SOG data is
turned on and works correctly.
CTW/STW data without the specified for-
mat data received. The number in the
brackets indicates radar number.
Confirm that the equipment that outputs
CTW/STW data is turned on and works
correctly.
Invalid waypoint ID data received. Con-
firm that the equipment that outputs way-
point ID data works correctly.
Invalid position data received. Confirm
that the equipment that outputs position
data works correctly.
Invalid heading data received. Confirm
that the equipment that outputs heading
data works correctly.
3. MAINTENANCE
3-5
Advertisement
Table of Contents
