How To Show/Hide The Enc Chart Objects - Furuno ENVISION AR-100M Operator's Manual

1. Click the menu button to open the main
menu.
2. Click [Graphics Object].
3. Click [Route].
4. Click [To Waypoint].
5. Check the checkbox for [Visible] to show the
waypoint information. If you want to hide the
information, remove the check mark from the
checkbox.
6. Adjust the slider bar for [Text Scale] to
change the size of the text for the waypoint
information.
7. Close the main menu.
1.8.9

How to show/hide the ENC chart objects

The following ENC chart objects can be displayed on the AR navigation system
screen:
• Buoy
• Coast line
*: The safety contour may or may not be visible depending on the safety contour set-
tings at the ECDIS.
Pilot station Pilot station
Buoy Buoy
Note 1: The AR navigation system cannot overlay ENC chart objects from the ECDIS
if the ECDIS has C-MAP charts installed. Uninstall C-MAP charts to use ENC chart
objects.
Note 2: The most detailed ENC chart objects at current position are displayed on the
AR navigation system. Therefore, ENC chart objects on the AR navigation system
may be different from the objects on the ECDIS.
• Pilot station
• Safety contour*
Safety contour Safety contour
1. OPERATION
Coast line Coast line
1-13