Furuno ENVISION AR-100M Operator's Manual page 35

How to mount the unit
Note: Select the mounting location which gives the shortest distance between the IP
camera and the monitor unit. When the IP camera is far from the monitor unit, the par-
allax error between the view from the monitor unit position and IP camera increases.
1. Drill four pilot holes in the mounting location for the mounting screws.
2. Secure the camera bracket using the four supplied self-tapping screws.
3. Mount the IP camera to the top of the camera bracket.
Camera bracket
4. Face the IP camera to the ship's bow direction, then fasten the bolt, using the sup-
plied knob, to lock the IP camera.
5. After locking the IP camera, remove the knob from the camera bracket.
Fasten the bolt using the knob to
lock the IP camera.
Note 1: Retain the knob to unfasten/fasten the bolt on the camera bracket.
Note 2: Do not move the IP camera after installation. When you want to adjust the vid-
eo position, see section 1.11.
2. INSTALLATION AND INITIAL SETTINGS
Camera
Knob
IP camera
Remove the knob after fastening the
bolt and locking the IP camera.
2-5