Table of Contents
Advertisement
2.2
Wiring
2.2.1
Main PC
Interface
No.
1
USB2.0 Port
2
Power Button
3
Reset Button
4
Remote PWR Switch Port
5
LED Indicator
6
12 VDC Power Input Port
7
HDMI 2 Port
8
HDMI 1 Port
9
Serial Port
10
USB2.0 Port
11
USB3.0 Port
12
LAN2 Port
13
LAN1 Port
1
6
7
8
Name
2
USB2.0, used for connecting the trackball, ENC
dongle, USB flash memory and USB keyboard*.
Note: Do not connect a USB device other than the
above-mentioned devices.
Turns the system on/off.
Resets the system.
Connect a remote switch (locally supplied), using
the supplied remote switch cable, to turn the system
on/off from the remote switch.
Upper is for power, lower is for SSD.
Connect the supplied AC adapter.
Not used.
Connect a monitor unit (locally supplied), using the
supplied HDMI cable. It is recommended to use a
monitor whose resolution is full HD (1920
RS-232C port, Not used.
2
USB2.0, used for connecting the trackball, ENC
dongle, USB flash memory and USB keyboard*.
Note: Do not connect a USB device other than the
above-mentioned devices.
2
USB3.0, used for connecting the trackball, ENC
dongle, USB flash memory and USB keyboard*.
Note: Do not connect a USB device other than the
above-mentioned devices.
Connect the IP camera through the PoE adapter.
Connect the HUB-3000 to communicate with the
bridge navigational equipment.
2. INSTALLATION AND INITIAL SETTINGS
2
3
Front
9
10 11
12
Rear
Description
4 5
13
1080).
2-7
Advertisement
Table of Contents
