Furuno ENVISION AR-100M Operator's Manual page 32

2. INSTALLATION AND INITIAL SETTINGS
How to mount the unit
1. Unfasten four screws to remove the four foot pads at the bottom of the main PC.
2. Insert the supplied four countersunk screws to the screw hole for the foot pad.
3. Attach two mounting brackets to the main PC, using the supplied screws.
4. Drill four pilot holes in the mounting location for the mounting screws.
5. Secure the unit using the four supplied self-tapping screws and flat washers.
2-2
Foot pad
(4 pcs)
Countersunk screw
(4 pcs)
Mounting bracket
(2 pcs)