Table of Contents
Advertisement
3. MAINTENANCE
Error
code
E0445
E0446
E0447*
E0448*
E0449*
E044A*
E044B*
E044C*
E044D*
E044E*
E044F*
E0520
E0530
E0601
E0602
E0701
E0702
E0703
E0704
E0705
3-6
Error message
No Sensor Data. (PITCH/ROLL) Invalid pitch/roll data received. Confirm
No Sensor Data. (COG/SOG)
No Sensor Data. (CTW/STW1)
No Sensor Data. (CTW/STW2)
No Sensor Data. (CTW/STW3)
No Sensor Data. (CTW/STW4)
No Sensor Data. (CTW/STW5)
No Sensor Data. (CTW/STW6)
No Sensor Data. (CTW/STW7)
No Sensor Data. (CTW/STW8)
No Sensor Data. (CTW/STW9)
No Camera Data
No Camera Data
Network Error.
Excessive Data.
Network Error.
Network Error.
User Permit not found.
Decode Error.
Excessive Data.
Meaning/Remedy
that the equipment that outputs pitch/roll
data works correctly.
Invalid COG/SOG data received. Confirm
that the equipment that outputs COG/
SOG data works correctly.
Invalid CTW/STW data received. The
number in the brackets indicates radar
number.
Confirm that the equipment that outputs
CTW/STW data works correctly.
No camera data received. Check the con-
nection between the LAN 2 port on the
main PC and PoE adapter and IP camera.
Confirm that power is supplied to the PoE
adapter.
Communication timeout with the IP cam-
era. Check the connection between the
LAN 2 port on the main PC and PoE
adapter and IP camera. Confirm that pow-
er is supplied to the PoE adapter.
The system cannot connect with the route
data server. Check the connection be-
tween the LAN1 port on the main PC and
ECDIS.
More than 200 waypoints are included in
a route. Use the route data where the
number of waypoints is 200 or less.
The system cannot connect with the ENC
chart server. Check the connection be-
tween the LAN1 port on the main PC and
ECDIS.
The ENC chart file does not exist on the
server. Check that the position data is in-
put to the ECDIS.
The system cannot find the ENC user per-
mit. Check that the ENC dongle is insert-
ed to the main PC. When the error keeps
occurring for one minute or more after
checking the ENC dongle connection, re-
start the system.
Decode error occurs. Confirm that the
user permit is the same as the one on the
ECDIS connected to this system and the
one stored to the ENC dongle.
There are too many data in the ENC
chart. This system cannot show the ENC
chart objects while this error occurs.
Advertisement
Table of Contents
