How To Enter The Ip Address Of The Route Server; How To Enter The Ip Address Of The Enc Chart Server - Furuno ENVISION AR-100M Operator's Manual

2. INSTALLATION AND INITIAL SETTINGS
2.3.7

How to enter the IP address of the route server

Do as follows to enter the IP address of the route server.
1. Login as a service technician, referring to
subsection 2.3.1.
2. Click [Service Setting].
3. Click [Network].
4. Click [Route Server].
5. Enter the IP address of the ECDIS that out-
puts the route monitoring data.
6. Click the [Commit & Reset] button to apply
the settings.
The AR navigation system application is au-
tomatically reset.
2.3.8

How to enter the IP address of the ENC chart server

Do as follows to enter the IP address of the ENC chart server.
1. Login as a service technician, referring to
subsection 2.3.1.
2. Click [Service Setting].
3. Click [Network].
4. Click [ENC Chart Server].
5. Enter the IP address of the ECDIS that out-
puts the ENC chart data.
6. Click the [Commit & Reset] button to apply
the settings.
The AR navigation system application is au-
tomatically reset.
2-16