Hardware Installation And Connection; Ha Rdwa Re Insta Lla Tio N A Nd C O Nne C Tio N; Installation Scenarios; Desktop Installation Procedure - ZyXEL Communications NSW Series User Manual

Ha rdwa re Insta lla tio n a nd
2.1 Insta lla tio n Sc e na rio s
This chapter shows you how to install and connect the NSW.
The NSW can be placed on a desktop or rack-mounted on a standard EIA rack. Use the rubber feet in a
desktop installation and the brackets in a rack-mounted installation.
Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front and 3.4
inches (8 cm) at the back of the NSW. This is especially important for enclosed rack
installations.
2.2 De skto p Insta lla tio n Pro c e dure
Make sure the NSW is clean and dry.
1
Set the NSW on a smooth, level surface strong enough to support the weight of the NSW and the
2
connected cables. Make sure there is a power outlet nearby.
Make sure there is enough clearance around the NSW to allow air circulation and the attachment of
3
cables and the power cord.
Remove the adhesive backing from the rubber feet.
4
Attach the rubber feet to each corner on the bottom of the NSW. These rubber feet help protect the
5
NSW from shock or vibration and ensure space between devices when stacking.
Note: Do NOT block the ventilation holes.
C o nne c tio n
NSW Series User's Guide
13
C
HA PTER
2