Ip Status Details - ZyXEL Communications NSW Series User Manual

Note: You must configure a VLAN first. Each VLAN can only have one management IP
address.
Basic Setting > IP Setup
Fig ure 32
The following table describes the labels in this screen.
Table 8 Basic Setting > IP Setup
L ABEL
Index
IP Address
IP Subnet Mask
VID
Type
Renew
Release
6.4.2 IP Sta tus De ta ils
Use this screen to view IP status details. Click a number in the
display the screen as shown next.
Basic Setting > IP Setup > IP Status Details: Static
Fig ure 33
The following table describes the labels in this screen.
Table 9 Basic Setting > IP Setup > IP Status Details: Static
L ABEL
Type
VID
IP Address
IP Subnet Mask
Chapter 6 Basic Setting
DESC RIPT IO N
This field displays the index number of an entry.
This field displays IP address of the NSW.
This field displays the subnet mask of the NSW.
This field displays the VLAN identification number of the NSW.
This shows whether this IP address is dynamically assigned from a DHCP server or manually
assigned ( ).
Sta tic
Click this to renew the dynamic IP address.
Click this to release the dynamic IP address.
DESC RIPT IO N
This shows whether ths IP address is dynamically assigned from a DHCP server or manually
assigned ( or ).
Sta tic DHC P
This is the VLAN identification number.
This is the IP address of your NSW in dotted decimal notation.
This is the IP subnet mask of your NSW in dotted decimal notation for example 255.255.255.0.
NSW Series User's Guide
column in the
Inde x
36
screen to
IP Sta tus