Basic Setting; C Ha Pte R 6 Ba Sic Se Tting; Overview; What You Can Do - ZyXEL Communications NSW Series User Manual

6.1 O ve rvie w
This chapter describes how to configure the
See Table 4 on page 27
6.1.1 Wha t Yo u C a n Do
• Use the
Syste m Info
• Use the
IP Se tup
device, and the management VLAN ID.
C a re fully m a na g e the IP a ddre ss o f the NSW Se rie s to e nsure
m a na g e m e nt c o nne c tivity with the NC C .
• Use the
Po rt Se tup
• Use the
DNS
6.2 Syste m Info rm a tio n
In the navigation panel, click
to view general system information. You can check the firmware version number.
Chapter 6 Basic Setting
for menu differences of the NSW Series.
screen (Section 6.2 on page
screen (Section 6.3 on page
screen (Section 6.5 on page
screen (Section 6.6 on page
Ba sic Se tting
NSW Series User's Guide
C
Ba sic Se tting
, , and
Syste m Info IP Se tup
32) to check the firmware version number.
34) to configure the NSW IP address, default gateway
39) to configure the NSW port settings.
41) to configure the default domain name server.
> to display the screen as shown. Use this screen
Syste m Info
32
HA PTER
screens.
Po rt Se tup
6