Gui-Based Ftp Clients - ZyXEL Communications NSW Series User Manual

8.7.4 G UI- b a se d FT P C lie nts
The following table describes some of the commands that you may see in GUI-based FTP clients.
General Commands for GUI-based FTP Clients
C O MMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory
Chapter 8 Maintenance
DESC RIPT IO N
Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
firmware files should be transferred in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
NSW Series User's Guide
57