Configure The Customized Protocols - HIKVISION DS-7700NXI-I/S Series User Manual

 The PoE ports are enabled with the short distance mode by default.
 The bandwidth of IP camera connected to the PoE via long network cable (100 to 300
meters) cannot exceed 6 MP.
 The allowed max. long network cable may be less than 300 meters depending on different
IP camera models and cable materials.
 When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or
CAT6 network cable to connect with the PoE interface.
 When the transmission distance reaches 250 to 300 meters, you must use the CAT6
network cable to connect with the PoE interface.
Step 3 Click Apply.

3.3 Configure the Customized Protocols

Purpose:
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them. The system provides 16 customized protocols.
Step 1 Click Protocol at the top taskbar to enter the protocol management interface.
Network Video Recorder User Manual
Figure 3-3 PoE Settings
39