ETC ArcSystem Pro One-Cell Series Installation Manual page 14

ETC Installation Guide
Pro One-Cell
Power
Internal wire colors vary by model.
Factory Wire Colors
Model
North America
and Europe
North America black
North America white
Europe
Europe
Perform the following steps to wire power to the driver.
WARNING:
device cannot be serviced or operated safely.
AVERTISSEMENT :
installés sans qu'un dispositif de déconnexion de l'alimentation ne soit
accessible.
1. Make sure power is off at the main circuit breaker.
Wire and Terminal Specifications on page 9
2. See
terminal torque ratings. Prepare the wires accordingly.
3.
Loosen the three screw terminals for NEUTRAL (N), GROUND (
4.
Insert the ground wire (typically green) into the GROUND (
5. Insert the neutral wire (typically white) into the NEUTRAL (N) terminal and tighten the screw.
6. Insert the line wire (typically black) into the LINE (L) terminal and tighten the screw.
7. Tug gently on the wires to ensure they are secure.
Pro One-Cell
Color Type
ground/earth
green/yellow
line/hot
neutral
brown live
blue neutral
Circuits that are installed without an accessible power disconnect
Il est imprudent d'utiliser ou de réparer les circuits
for specification of wire, strip length, and
Page 14 of 29
), and LINE (L) connections.
) terminal and tighten the screw.
ETC