Advantech ADAM-5511 Manual page 140

Step 2. I/O Module Address Setting
Before integrating ADAM I/O Module into the database of HMI
software, please refer the table as below to map ADAM-4000/5000 I/O
address.
Analog type of ADAM-5000 I/O module:
For example, if there is a ADAM-5024 (4-channel AO Module) in slot 2,
the address of this module should be 40017~40020.
Note: ADAM-5080 is a special 4-channel counter module.
The data type is designed as "unsigned long". When
you insert an ADAM-5080 in slot 0, the address
should be 40001, 40003, 40005 and 40007.
Digital type of ADAM-5000 I/O module:
Slot Position
0
1
2
3
Slot Position
0
1
2
3
Address
40001-40008
40009-40016
40017-40024
40025-40032
Address
00001-00016
00017-00032
00033-00048
00049-00060