Advantech ADAM-5511 Manual page 139

Note: ADAM-5511 Utility will not detect ADAM-4000 module
automatically before download the program with
remote I/O and restart ADAM-5511.
ADAM-5511 designed as a standard Modbus product and could be
integrated with HMI via simple method. Here is an integration example
for ADAM-5511 and Fix 6.0 HMI software.
Step 1. Configure the Communication Network
Define the communication setting of HMI, thus ADAM-5511 could be
detected and recognized on the network.
Start System configuration and select configure/SCADA, then select
MB1 and click configure. When MB1 Driver Configurator pop up, click
setup.