Advantech ADAM-5511 Manual page 132

Step 3. Select the specific program, then click the "Run" icon.
ADAM-5511 has expansion ability by integrating ADAM-4000 module
as remote and distributed I/O. However, there are some steps you need
to follow.
Step 1. Configure ADAM-4000 Module (Refer to chapter 5.2)
Step 2. Edit Program:
Please add the below section of program into your executive program.
Note: The address setting of ADAM-4000 module must be
the same with your configuration in ADAM-4000/5000
Utility. For this example, we defined address 2 for
ADAM-4011, address 3 for ADAM-4012, address 4
for ADAM-4013, address 5 for ADAM-4014, address
6 for ADAM-4017, address 7 for ADAM-4018, ad-