Advantech ADAM-5511 Manual page 118

Select the specific module, then sets the input/output range, baud rate,
data format, checksum status.
Note: Baud rate and Checksum can only be changed in the
INIT* state. Changed settings only take effect after a
module is rebooted.
Address: Represents the address of the module. Range is from 0
to 255.
Baudrate: Represents the baud rate.
Checksum: Represents the checksum status, i.e., disabled/enabled.
Firmware Ver: Represents the module's firmware.
Input range: Represents the type. Please refer to the module user's
manual.
Data format: Represents the data format. Please refer to the module
user's manual.