Olympus CX33 Instructions Manual page 15

b
c
a
When using the specimen holder CX3-HLDT
1
Rotate the coarse focusing knob a in the arrow direction to fully
lower the stage.
2 Press the specimen holding lever knob b backward (arrow direction)
to open the lever c , and slide the specimen from front to back on
the stage to place it.
3
After placing the first specimen until it touches the end, place the
second specimen so that it touches the first specimen.
4 After placing the specimens, return the specimen holding lever c
a
gently.
NOTE
Slide glass
It is recommended to use the following slide glasses a .
Length: 76 mm, Width: 26 mm, Thickness: 0.9 to 1.4 mm
b
(Thickness: 0.9 to 1.2 mm for darkfield observation)
NOTE
Place the specimen carefully. If you return the specimen
holding lever c with excess force or release your hand
from the specimen holding lever knob b in the middle,
the lever may collide with the slide glass to damage it.
Use the cover glass b with the thickness of 0.17mm to
fully deliver the performance of objective.
CX33
(Option)
11