Draining Product From The Freezing Cylinders; Rinsing - Taylor C302 Operator's Manual

Slush freezer
Table of Contents

Advertisement

OPERATING PROCEDURES
To disassemble the Model C302, the following items will
be needed:
Two cleaning pails
Necessary brushes (provided with freezer)
Cleaner
Single-service towels
Draining Product from the Freezing
Cylinders
1. Press the BEATER (- - -) key. This will allow the
beater to operate, and CO
maintained to push the product from the freezing
cylinder. Open the draw valve and drain the product
from the machine until the CO
6
2. When all the product has been drained from the
freezing cylinder, close the draw valve and press the
OFF (<- -) key. Discard this product.
3. Repeat step 1 through step 2 for the other freezing
cylinders.
6-10
pressure will be
2
begins to jet.
2
Figure 6-38
Figure 6-39

Rinsing

Note: The following instructions are for one pair of
freezing cylinders under an LCD.
1. To place the left cylinder in the Rinse mode, press
the MENU (SELECT) key. Move the cursor by
pressing the AUTO (- ->) key until the third line
indicates RINSE / SANITIZE.
<
- -
-
> -
2. Press the MENU (SELECT) key. Move the cursor
under RINSE by pressing the OFF (<- -) key twice.
13039b
RINSE
- - - -
<
- -
-
> -
3. Pressing the MENU (SELECT) key will give you the
option for rinsing the left freezing cylinder. Move the
cursor under the word YES. Pressing the MENU
(SELECT) key at this time will start the beater motor
and deliver water and CO
LEFT
SIDE
<
- -
-
> -
4. Allow the rinse water to flow into the cylinder until it is
13039o
approximately two thirds full. With a pail under the
door spout, open the draw valve and drain the rinse
water. Repeat this procedure until the rinse water
being drawn is clear.
5. Repeat step 3 through step 4 for the right freezing
cylinder.
Note: There is a left and a right freezing cylinder for
each LCD.
RIGHT SIDE
<
- -
-
> -
6. When draining is complete, press the OFF (<- -) key.
Model C302
OPERATOR MENU
A B C D E F G H I
RINSE / SANITIZE
RINSE / SANITIZE
SANITIZE
to the left cylinder.
2
RINSE
YES
- - -
RINSE
YES
- - -
Operating Procedures
S
E
L
EXIT
S
E
L
NO
S
E
L
NO
S
E
L

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents