Taylor C302 Operator's Manual page 42

TROUBLESHOOTING GUIDE
Problem
9. Excessive mix leakage
from door spout.
10. Unable to adjust brix.
11. Lack of syrup being
supplied to machine.
8
8-2
Probable Cause
a. Inadequate lubrication of draw
valve O-rings.
b. Wrong type lubricant on draw valve
O-rings.
c. Worn or missing draw valve 
O-rings.
a. Syrup lines need to be cleaned and
sanitized.
b. Blocked flow control.
a. Loss of CO to propel syrup.
2
b. Clogged or kinked syrup lines.
Model C302
Remedy
a. Lubricate properly.
b. Use food grade lubricant 
(example: Taylor Lube HP).
c. Replace or install O-rings on draw
valve.
a. Clean and sanitize syrup lines.
b. Contact a service technician.
a. Contact a service technician.
b. Sanitize syrup lines regularly. If
kinked, repair, or replace.
Page
Ref.
6-3
6-1
6-3/9-1
- - -
- - -
- - -
- - -
Troubleshooting Guide