Status Messages - Epson Stylus Pro 7500 Reference Manual

Status messages

The following messages show the printer status. For error
messages, see "Printer Stops Printing Unexpectedly" on page 6-2.
READY
POWER OFF
INK DRY
NN MIN
RESET
PRESS PAUSE
BUTTON
PRINTING
WAIT
PAUSE
NO INK CARTRIDGE
INK LOW
LOAD PAPER
TURN PWR OFF AND
ON
INK CHARGING
nnn%
TRANSPORT PREP
nn%
1-6
The Control Panel
W* Ready to print data.
The power is off.
W* Drying ink after printing. Wait for "NN" minutes.
The printer is being reset.
The Pause button should be pressed.
W* Receiving print data.
W* The printer is warming up, charging ink, or
initializing.
The printer is paused. To resume printing, press
the Pause button.
You are replacing the ink cartridge(s).
Ink cartridge(s) is (are) nearly empty. Replace
the ink cartridge(s) indicated by the Ink Out
light(s). When the ink cartridge(s) is (are) out,
printing stops. Printing can be resumed after
empty cartridge(s) have been replaced.
The paper set lever is down while loading
paper. When you load paper and pull the set
lever up, PRESS PAUSE BUTTON appears.
After clearing jammed paper, this message
appears. Turn the printer off and on.
The printer is charging the ink delivery system.
This message shows the progress of the ink
charging process.
The printer is preparing for transportation. This
message shows the progress of the preparation
process.