Using Roll Paper; Attaching The Roll Paper To The Spindle - Epson Stylus Pro 7500 Reference Manual

Using Roll Paper

Attaching the roll paper to the spindle

To install the roll paper onto the spindle, follow the steps below.
To remove roll paper or empty roll paper cores, see "Removing
the roll paper from the spindle" on page 4-4.
1. Slide the movable flange off the end of the spindle.
2. Place the roll paper on a flat surface so that the paper unwinds
in the direction shown below.
3. Slide the roll paper onto the spindle until it fixes into place on
the fixed flange.
Paper Handling
4-3