Selectype Menus - Epson Stylus Pro 7500 Reference Manual

Note:
❏ To exit SelecType mode at anytime, press the Pause button.
❏ To return to step 2, press the SelecType button.

SelecType menus

The six SelecType menus are described below.
"Printer Setting menu (PRINTER
SETTING MENU)" on page 1-10
"Test Print menu (TEST PRINT
MENU)" on page 1-13
"Printer Status menu (PRINTER
STATUS MENU)" on page 1-13
"Paper Configuration menu
(PAPER CONFIG. MENU)" on page
1-14
"Cutter Replacement menu
(CUTTER REPLACE MENU)" on
page 1-14
"Head Alignment menu (HEAD
ALIGNMENT MENU)" on page 1-14
Various printer settings are
available.
You can print a nozzle check
pattern and status sheet.
You can see the firmware version,
total prints since delivery, and ink
cartridge/parts life, on the LCD.
You can register the paper
thickness and ink drying time, and
select the specified value.
Follow this menu when you
replace the cutter. For details, see
"Replacing the Paper Cutter" on
page 5-5.
You can correct any head
misalignment to obtain optimum
printing results. For details, see
"Performing the head alignment"
on page 1-16.
The Control Panel
1-9