❏ The platen gap may be too narrow for your paper. Set the
platen gap setting to WIDE in the Printer Setting menu of
SelecType mode. See "SelecType Settings" on page 1-7.
Color Documents Print in Black Only
Try one or more of these solutions:
❏ Make sure the color data settings in your application software
are correct.
❏ Make sure Color (not Black) is set in the Main menu for
Windows or Print dialog box for Macintosh.
Printing Could be Faster
Try one or more of these solutions:
❏ To increase print speed, select the Automatic mode in the
Main menu for Windows or in the Print dialog box for
Macintosh and then move the slider towards Speed.
❏ Do not run too many applications at the same time. Close any
applications you are not using.
❏ Delete unnecessary files to make room on your hard disk
drive.
Note:
Your computer may not have enough memory. For further tips, see
"Increasing the Print Speed (Windows only)" on page -14.
Troubleshooting
6-15