Using Epson Monitor3 - Epson Stylus Pro 7500 Reference Manual

Data will be sent to the
printer after being
stored on your disk
Check for errors before
starting to print.
Check the ink level
before starting to print.

Using EPSON Monitor3

After you send a print job to the printer, you can use the EPSON
Monitor3 utility to check on, control, or cancel print jobs that are
queued for printing. This utility also shows the status of the job
currently being printed.
Select this check box to prevent horizontal
banding in your printout. By default,
graphics data is sent by the computer to
the printer in rectangular bands, which
prevents the printer from having to
reconstruct an entire image in memory
before printing it. Selecting this check box
will make the computer temporarily store
the image data on its hard drive and then
send it to the printer as a whole to prevent
banding in the printed image.
Select this check box if you want to check
for errors before starting to print.
Select this check box if you want to check
the ink level before starting to print.
-9