Epson Stylus Pro 7500 Reference Manual page 141

2. Make sure the Operate light and Pause light are not flashing,
then push the paper set lever all the way down.
3. Open the roll paper cover and rewind the roll paper using the
flange on the right. If the sheet is jammed, carefully pull down
the jammed paper.
4. When TURN PWR OFF AND ON is displayed on the LCD panel,
press the Power button to turn the printer off and back on.
5. Make sure that the Paper Out light is on and LOAD PAPER is
displayed on the LCD panel. To load paper see "Using Roll
Paper" on page 4-3 or "Using Cut Sheet Media" on page 4-15.
Troubleshooting
6-19