Test Head Module Dimensions - Keysight PNA Series Installation And Service Manual

System Specifications
Specifications
Figure 4-2 External Connection Diagram for the Test Head Bias-Tee
Parametric
DC Source
Ex: Keysight
4142B or E5270B
Force
Sense
GNDU
NOTE: GNDU is connected to only one of the test heads.
A second GNDU connection is not required.
Refer to the documentation of your parametric DC source for the
appropriate cables to use for connecting to the test head bias tee.
• Test head sub-miniature triax connectors are BJ152 bulkhead jacks from Trompeter
Electronics (www.trompeter.com).
• Parametric DC source connectors are standard triax.

Test Head Module Dimensions

Test head module dimensions are shown in
4-6
Cable, Keysight 16494A
Cable, Keysight 16493H
Figure 4-3 on page
PNA Series Microwave Network Analyzer System
Cable, Cascade Microtech
104-330-LC
F
Test
S
Head
G
Adapter, Trompeter Bj78
4-7.
Installation and Service Guide N5251-90001
N5251A
N5250_001_402