N5227A Rear Panel Specifications; N5251A Test Head Bias-Tees Specifications - Keysight PNA Series Installation And Service Manual

System Specifications
Specifications

N5227A Rear Panel Specifications

Table 4-2 N5227A Rear Panel IF Inputs
IF Connector Input Frequency
0.1 dB Compression Points at IF inputs
Nominal Input Impedance at IF Inputs
RF Damage Level to IF Connector Inputs
DC Damage Level to IF Connector Inputs
Table 4-3 N5227A RF and LO Outputs
Rear Panel LO Power - Test Port Frequencies Above 67 GHz
a
67 GHz to 110 GHz
Rear Panel RF Power - Test Port Frequencies Above 67 GHz
b
67 GHz to 76 GHz
b
76 GHz to 96 GHz
b
96 GHz to 110 GHz
a. For rear panel LO port frequency, divide by 8.
b. For rear panel RF port frequency, divide by 6.

N5251A Test Head Bias-Tees Specifications

Table 4-4 Test Head Bias Input Connector
GNDU:
SENSE:
FORCE:
Maximum Voltage:
Damage Voltage:
Maximum Current:
4-4
8.333 MHz
27.0 dBm
–
50 Ohms
20.0 dBm
–
25 Volts
-7 to 13 dBm
–
-4 to 10 dBm
–
+1 to 5 dBm
–
+5 to 1 dBm
–
Sub Mini-Triaxial Connector, Trompeter BJ152 Insulated Bulkhead
Jack (150 Series)
Sub Mini-Triaxial Connector, Trompeter BJ152 Insulated Bulkhead
Jack (150 Series)
Sub Mini-Triaxial Connector, Trompeter BJ152 Insulated Bulkhead
Jack (150 Series)
± 30 VDC (typical)
± 40 VDC
± 0.5 AMP
PNA Series Microwave Network Analyzer System
Installation and Service Guide N5251-90001
N5251A