Instrument Markings - Keysight PNA Series Installation And Service Manual

Safety and Regulatory Information
Regulatory Information

Instrument Markings

The instruction documentation symbol. The product is marked with this symbol when it is
necessary for the user to refer to the instructions in the documentation.
The AC symbol indicates the required nature of the line module input power.
This symbol indicates separate collection for electrical and electronic equipment, mandated
under EU law. All electric and electronic equipment are required to be separated from normal
waste for disposal (Reference WEEE Directive).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is in the STANDBY position.
This symbol indicates that the power line switch is in the OFF position.
This symbol is used to identify a terminal which is internally connected to the product frame or
chassis.
The CSA mark is a registered trademark of the CSA International.
This is a symbol of an Industrial Scientific and Medical Group 1 Class A product (CISPR 11,
Clause 5).
This is a marking to indicate product compliance with the Canadian Interference-Causing
ICES/NMB-001
Equipment Standard (ICES-001). Cet appareil ISM est conforme à la norme NMB du Canada.
Direct Current.
The instrument has been designed to meet the requirements of IP 2 0 for egress and
IP 2 0
operational environment.
The RCM mark is a registered trademark of the Australian Communications and Media
Authority.
Indicates the time period during which no hazardous or toxic substance elements are
expected to leak or deteriorate during normal use. Forty years is the expected useful life of
the product.
This symbol on all primary and secondary packaging indicates compliance to China standard
GB 18455-2001.
South Korean Certification (KC) mark; includes the marking's identifier code which follows the
format: MSIP-REM-YYY-ZZZZZZZZZZZZZZ.
1-6
PNA Series Microwave Network Analyzer System
Installation and Service Guide N5251-90001
N5251A