Table of Contents
Advertisement
Correct Open Z-Gap
If there is a gap (B) between the Open Z-Gap bars (C) and the baseline (A) and there is no
gap between the Closed Z-Gap bars and the baseline, the Z-Gap is correct.
Incorrect Open Z-Gap
If there is no gap (B) between the Open Z-Gap bars (C) and the baseline (A), turn all three
(3) print pad adjustment knobs clockwise (right) 1-step and print the file again to verify that
the lines do not touch. If they touch on the second print, adjust all three (3) print pad
adjustment knobs clockwise (right) 1-step and reprint the file. Continue this procedure until
there is a gap.
Advertisement
Table of Contents
Need help?
Do you have a question about the CubePro and is the answer not in the manual?
Questions and answers