Bosch Rexroth IndraControl S67 Series Application Description page 51

DOK-CONTRL-S67DO8M122A-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Outputs – 2.0 A (4×M12)
Position LED Color/status
16 F Red
17 I/O Yellow
Red
Position LED Color/status
18 U Green
A
Off
19 U Green
LS
Off
Cause
At least one global diagnostic mes‐
sage occurred at module
Output signal present
Error at output
Tab. 10-2: Operating messages 2
Cause
Actuator supply U
Actuator supply U
Logic and sensor supply U
ent
Logic and sensor supply U
present
Tab. 10-3: Operating messages 3
Bosch Rexroth AG
Diagnostics via LED Signals
Remedy/information
Check supply voltages U
of upstream IndraControl S67 com‐
ponents
–
Check actuator connection for short
circuit, overload and wire breakage.
If the output is active, short-circuit
or overload can be diagnosed, but
no disconnection. If the output is in‐
active, only a disconnection can be
diagnosed (wire breakage)
Remedy/information
present –
A
not present Connect supply voltage and check
A
voltage level if required
pres‐ –
LS
not Connect supply voltage and check
LS
voltage level if required
49/69
and U
LS A